|
|
Rank: Faster (<10s ET)
Groups: Member
Joined: 1/1/2009
Posts: 41
Points: -177
Location: spring creek nv.
|
i pulled my injector bodies out of intake to send to spud to be flowed..when i did this i noticed that a few of them the threads looked bad...i already have intake and blower bolted on engine..can i run a tap into intake and clean up holes before i attemp to reinstall injector bodies without taking blower and intake off engine or will the cleaning threads put to much aluminum shavings into engine and hurt it?
thanks
don
badtoyzz racing
775-340-5505
|
|
Rank: Holy S&*!# Fast (<6s ET)
Groups: Administration
, Driver, Member, PictureUpload
Joined: 5/7/2007
Posts: 631
Points: 1,743
Location: loveland
|
put some grease on the tap and it will catch the shavings and all will be good
|
|
Rank: Faster (<10s ET)
Groups: Member
Joined: 1/1/2009
Posts: 41
Points: -177
Location: spring creek nv.
|
BADCHAD wrote:put some grease on the tap and it will catch the shavings and all will be good thanks chad;;;;;just what i was thinking but wanted to make sure i was on right track..they wasn't real bad.just 3 of them[nozzle bodies]had the first 2 or 3 threads but want to clean them so don't take any threads out going back in with nozzles..first blown alky engine so on the nervice side...
|
|
|
Guest |
