|
|
Rank: Faster (<10s ET)
Groups: Member
Joined: 1/1/2009
Posts: 41
Points: -177
Location: spring creek nv.
|
i have a set of sheet metal fabicated valve covers and was told they will not work with port injection without major modifications.have tall deck bbc with bds blower intake.can everyone tell me what valve covers they are using that clears port injectors without modifications or are there someone on here that could modifie mine to work for reasonable price?pics of what you are using would be nice also thanks don badtoyzz racing hotrodharley@citlink.netFile Attachment(s):
 Picture 452.jpg (309kb) downloaded 19 time(s).
|
|
Rank: Holy S&*!# Fast (<6s ET)
Groups: Administration
, Driver, Member, PictureUpload
Joined: 5/7/2007
Posts: 631
Points: 1,743
Location: loveland
|
just depends on what angle your nozzles where drilled at. I used the "wide" style fabricated covers on my tall deck with a bds with no mods and they clear, But my tall deck kb with a differnt bds manifold will only clear the "narrow" fab covers with a little clearancing on the rails around the ports. Yours are the "wide style", have the nozzles been drilled yet, if not they can be installed to clear with a little clearing on the manifold rail to fit them
|
|
Rank: Faster (<10s ET)
Groups: Member
Joined: 1/1/2009
Posts: 41
Points: -177
Location: spring creek nv.
|
BADCHAD wrote:just depends on what angle your nozzles where drilled at. I used the "wide" style fabricated covers on my tall deck with a bds with no mods and they clear, But my tall deck kb with a differnt bds manifold will only clear the "narrow" fab covers with a little clearancing on the rails around the ports. Yours are the "wide style", have the nozzles been drilled yet, if not they can be installed to clear with a little clearing on the manifold rail to fit them I have the wide side covers.the intake was done at the factory.came out of box from BDS already drilled;;on the engine that cleared was it a bbc tall deck and did you use long or short nozzle bodys? don badtoyzz racing
|
|
Rank: Holy S&*!# Fast (<6s ET)
Groups: Administration
, Driver, Member, PictureUpload
Joined: 5/7/2007
Posts: 631
Points: 1,743
Location: loveland
|
I used a tall deck with long nozzle bodies
|
|
Rank: Faster (<10s ET)
Groups: Member
Joined: 1/1/2009
Posts: 41
Points: -177
Location: spring creek nv.
|
thanks for the help
|
|
|
Guest |
